MFC通用型電磁流量計,基于法拉第電磁感應定律進行工作,該產品幾乎沒有壓損,而且測量不受流體密度、黏度、溫度、壓力變化的影響,量程比寬,是測量電導率大于5μS/cm的液體體積流量理想的儀表。
主要參數
MFC通用型電磁流量計產品特點
1、測量準確度高,可達示值的±0.2%,而且可測量正/反兩個方向的流量。
High measurement accuracy, up to ±0.2% of the indicated value, and available for measuring forward and reverse direction flows
2、安裝要求低,前直管段只要5D,后直管段為2D。
Low installation requirements: 5D for the front straight pipe section and 2D for the rear straight pipe section.
3、儀表功耗小,小于20VA。
Small instrument power consumption of less than 20 VA.
4、轉換器具有良好的互換性,不必重新進行實流標定就可達到準確度。
The converter has good interchangeability, and the accuracy can be achieved without re-calibrating the real flow.
5、管道空管后,自動檢測并使數據置零和報警,防止因空管干擾導致流量計數據亂跳而誤操作。
Automatic detection, data zeroing, and alarm in case of an empty pipeline, to prevent misoperation of flowmeter data due to interference from the empty pipeline.